FD18G 1.8 ton LPG and gasoline forklift overview
The OLIFT FD18G is listed with LPG and gasoline power, a rated capacity of 1,800 kg, a 500 mm load centre and a 3,000 mm lift height. The table also lists a K21 engine and hydraulic transmission. Confirm the load chart, fuel configuration and mast setup for the job before selecting the truck.
Published specifications
| Model | FD18G | |||
| Power Type | LPG & Gasoline | |||
| Rated Capacity | kg | 1800 | ||
| Load Centre | mm | 500 | ||
| Lift Height | mm | 3000 | ||
| Fork Size | L×W×T | mm | 920×120×35 | |
| Mast Tilt Angle | F/R | Deg | 6°/12° | |
| Front Overhang (Wheel center to fork face) | mm | 410 | ||
| Ground Clearance（Bottom of mast） | mm | 110 | ||
| Overall Dimension | Length to face of fork(Without fork) | mm | 2285 | |
| Overall Width | mm | 1086 | ||
| Mast Lowered Height | mm | 1995 | ||
| Mast Extended Height(With backrest) | mm | 3940 | ||
| Overhead Guard Height | mm | 2040 | ||
| Turning Radius (outside) | mm | 2055 | ||
| Min.insecting aisle | mm | 2150 | ||
| Speed | Travel (Full load) | km/h | 15 | |
| Lifting (Full load) | mm/s | 440 | ||
| Max.Gradeability (No load/Full load) | % | 20 | ||
| Tire | Front | mm | 6.50-10-12PR | |
| Rear | mm | 5.00-8-10PR | ||
| Wheelbase | mm | 1400 | ||
| Service weight | kg | 3030 | ||
| Battery | Voltage/Capacity | V/Ah | 12/80 | |
| Engine | Model | K21 | ||
| Manufacture | GCT (NISSAN) | |||
| Rated output/r.p.m. | kw | 31.2/2250 | ||
| Rated torque/r.p.m. | N·m | 143.7/1600 | ||
| No.of Cylinder | 4 | |||
| Bore×Stroke | mm | 89×83 | ||
| Displacement | cc | 2065 | ||
| Fuel Tank Capacity | L | 45 | ||
| Transmission | Type | Hydraulic | ||
| Stage | FWD/RVS | 1/1 | ||
| Opearating Pressure for Attachment | Mpa | 14.5 | ||
Planning an FD18G enquiry
Share the load weight and dimensions, load centre, lift height, overhead clearance, operating environment, shift pattern, attachments, fuel supply and delivery destination. Confirm the 1,800 kg rating for the actual load and selected attachment. The specification lists both LPG and gasoline as power type; ask OLIFT to confirm the exact fuel arrangement and the listed 45 L fuel-tank detail for the offered configuration.
Frequently asked questions
What rated capacity and load centre are listed?
The table lists an 1,800 kg rated capacity and a 500 mm load centre. Check the load chart for your load dimensions and attachment.
What lift and mast heights are shown?
The listed lift height is 3,000 mm. The table shows a lowered mast height of 1,995 mm, extended height of 3,940 mm with backrest and overhead guard height of 2,040 mm. Confirm the selected mast and overhead clearance.
What engine and transmission are listed?
The table lists a K21 engine with manufacturer text “GCT (NISSAN),” rated output of 31.2 kW at 2,250 rpm, and a hydraulic transmission with 1/1 forward/reverse stages. Confirm the supplied configuration with OLIFT.
What should I include when requesting a quote?
Include the load, load centre, required height, working conditions, fuel supply, attachments, overhead restrictions and delivery destination.
Reviews
There are no reviews yet.