TG20 2 ton LPG forklift overview
The OLIFT TG20 is listed as an LPG-powered forklift with a 2,000 kg rated capacity, a 500 mm load centre and a 3,000 mm lift height. The published table also identifies a K25EPA engine and hydraulic transmission. Check the load chart, mast configuration, LPG supply and site requirements for the intended application.
Published specifications
| Model | TG20 | |||
| Power Type | LPG | |||
| Rated Capacity | kg | 2000 | ||
| Load Centre | mm | 500 | ||
| Lift Height | mm | 3000 | ||
| Fork Size | L×W×T | mm | 1070×120×40 | |
| Mast Tilt Angle | F/R | Deg | 6°/12° | |
| Front Overhang (Wheel center to fork face) | mm | 445 | ||
| Ground Clearance（Bottom of mast） | mm | 80 | ||
| Overall Dimension | Length to face of fork(Without fork) | mm | 2355 | |
| Overall Width | mm | 1110 | ||
| Mast Lowered Height | mm | 2070 | ||
| Mast Extended Height(With backrest) | mm | 4070 | ||
| Overhead Guard Height | mm | 2080 | ||
| Turning Radius (outside) | mm | 2110 | ||
| Speed | Travel (Full load) | km/h | 17 | |
| Lifting (Full load) | mm/s | 530 | ||
| Max.Gradeability (No load/Full load) | % | 20 | ||
| Tire | Front | mm | 21*7*15 | |
| Rear | mm | 16(1/4)*6*11(1/4) | ||
| Wheelbase | mm | 1400 | ||
| Service weight | kg | 3445 | ||
| Battery | Voltage/Capacity | V/Ah | 12/80 | |
| Engine | Model | K25EPA | ||
| Manufacture | GCT (NISSAN) | |||
| Rated output/r.p.m. | kw | 42/2700 | ||
| Rated torque/r.p.m. | N·m | 185/1350 | ||
| No.of Cylinder | 4 | |||
| Bore×Stroke | mm | 89×100 | ||
| Displacement | cc | 2488 | ||
| Fuel Tank Capacity | L | 55 | ||
| Transmission | Type | Hydraulic | ||
| Stage | FWD/RVS | 1/1 | ||
Selection information
Before requesting a quotation, share the load weight and dimensions, load centre, required lift height, overhead clearance, working environment, shift pattern, attachment needs, LPG supply arrangements and delivery destination. The listed capacity is tied to the stated 500 mm load centre; confirm capacity for the actual load and mast configuration.
Frequently asked questions
What rated capacity and load centre are listed?
The TG20 table lists a rated capacity of 2,000 kg at a 500 mm load centre. Confirm the load chart against your load dimensions and attachment.
What lift and mast heights are shown?
The listed lift height is 3,000 mm. The table also gives 2,070 mm mast-lowered height and 4,070 mm mast-extended height with backrest. Confirm the selected mast and overhead clearance.
Which engine and transmission are specified?
The table lists a K25EPA engine, manufacturer text “GCT (NISSAN),” rated output of 42 kW at 2,700 rpm, and a hydraulic transmission with 1/1 forward/reverse stages. Confirm the exact supplied configuration.
What details should an enquiry include?
Provide load weight and dimensions, load centre, lift height, operating conditions, LPG supply, attachments and destination. Confirm fuel system details and local site requirements with OLIFT.
Reviews
There are no reviews yet.