FD50 5 ton diesel forklift overview
The OLIFT FD50 product listing shows a rated capacity of 5,000 kg, a 600 mm load centre and a 3,000 mm lift height. The specification table lists two engine configurations: Isuzu 6BG1-02 and Xichai 6110. Confirm the current configuration and applicable load chart for your site and handling requirements.
Checks before choosing an FD50 configuration
- Share the load weight, dimensions, load centre and any attachment requirements.
- Confirm lift height, mast extended height and overhead clearance for the work area.
- Review aisle or yard access, turning space, surface conditions and expected duty cycle.
- Confirm which engine configuration is available for your destination and order.
| Model | FD50 | |||
| Power Type | Diesel | |||
| Rated Capacity | kg | 5000 | ||
| Load Centre | mm | 600 | ||
| Lift Height | mm | 3000 | ||
| Fork Size(L×W×T) | mm | 1220×150×60 | ||
| Mast Tilt Angle(F/R) | Deg | 6°/12° | ||
| Front Overhang (Wheel center to fork face) | mm | 590 | ||
| Ground Clearance（Bottom of mast） | mm | 200 | ||
| Turning Radius (outside) | mm | 3250 | ||
| Max.Gradeability (No load/Full load) | % | 20 | ||
| Wheelbase | mm | 2250 | ||
| Service weight | kg | 8150 | ||
| Overall Dimension | Length to face of fork(Without fork) | mm | 3440 | |
| Overall Width | mm | 2010 | ||
| Mast Lowered Height | mm | 2500 | ||
| Mast Extended Height(With backrest) | mm | 4415 | ||
| Overhead Guard Height | mm | 2430 | ||
| Speed | Travel (Full load) | km/h | 30 | |
| Lifting (Full load) | mm/s | 500 | ||
| Tire | Front | mm | 8.25-15-14PR | |
| Rear | mm | 8.25-15-14PR | ||
| Battery | Voltage/Capacity | V/Ah | (12/80) x 2 | |
| Engine | Model | 6BG1-02 | 6110 | |
| Manufacture | ISUZU | XICHAI | ||
| Rated output/r.p.m. | kw | 82.4/2000 | 83/2000 | |
| Rated torque/r.p.m. | N·m | 416/1600 | 450/1400-1500 | |
| No.of Cylinder | 6 | 6 | ||
| No.of Cylinder | mm | 105×125 | 110×125 | |
| Displacement | cc | 6494 | 7120 | |
| Fuel Tank Capacity | L | 125 | 125 | |
| Transmission | Type | Hydraulic | Hydraulic | |
| Stage(FWD/RVS) | 2/2 | 2/2 | ||
Request FD50 specifications and a quotation
Send the load details, lift requirements, attachments, operating environment, preferred engine configuration and delivery destination for review.
Contact OLIFT about the FD50 or browse the diesel forklift range.
With technological innovation, our product configuration and parameters will continue to change without notice;
if there is any doubt, the specific confirmation of our international trade sales shall prevail.
Reviews
There are no reviews yet.