FD50R 5.0 ton rough terrain forklift overview
The OLIFT FD50R is listed with a 5,000 kg rated capacity, a 3,000 mm lift height, 4WD and a Yunnei 4102 engine. Confirm the load chart, attachment and site conditions against the intended job before selection.
Published specifications
| Model | FD50R | |
| Rated Capacity | kg | 5000 |
| Mast width | mm | 180 |
| Max.Gradeability (No load/Full load) | % | <35° |
| Frame articulation | mm | Front 250 Rear 300 |
| Weight | kg | 6000 |
| Mast Tilt Angle(F/R) | Deg | 12° |
| Dimension | mm | 4000*2080*2650 |
| Tires | mm | 16/70-24 |
| Turning radius (outside tires) | mm | 3900 |
| Lift Height | mm | 3000 |
| Fork length (standard) | mm | 1220 |
| Ground Clearance（Bottom of mast） | mm | 330 |
| Mast Lowered Height | mm | 2400 |
| Engine | Yunnei4102 | |
| Rated output/r.p.m. | kw | 76/3200 |
| Rated torque/r.p.m. | N·m | 285/1200-2800 |
| No.of Cylinder | 4 | |
| No.of Cylinder | mm | 81×97 |
| Displacement | L | 1.99 |
| Drive Model | 4WD | |
| Gearbox | 280 |
Planning an FD50R enquiry
Share load weight and dimensions, lift height, attachment needs, ground conditions, travel route, working hours and delivery destination. The table lists maximum gradeability as “<35°” in a percent-labelled row; ask OLIFT to confirm the correct unit, measurement and load condition.
Frequently asked questions
What rated capacity and lift height are listed?
The published table lists 5,000 kg rated capacity and 3,000 mm lift height. Confirm the load chart for the actual attachment and working configuration.
Which drive and engine are shown?
The table identifies 4WD and a Yunnei 4102 engine, with rated output listed as 76 kW at 3,200 rpm. Confirm the supplied engine configuration.
What should I include in a quotation request?
Include the load, lift height, ground and slope conditions, duty cycle, attachments and delivery destination.
Reviews
There are no reviews yet.