FD35R 3.5 ton rough terrain forklift overview
The OLIFT FD35R specification lists a 3,500 kg rated capacity, a 3,000 mm lift height, 4WD and a Yunnei 490 engine. Confirm the load chart and the selected attachment against the intended job and ground conditions.
Published specifications
| Model | FD35R | |
| Rated Capacity | kg | 3500 |
| Mast width | mm | 160 |
| Max.Gradeability (No load/Full load) | % | <35° |
| Frame articulation | mm | Front 200 Rear 250 |
| Weight | kg | 4400 |
| Mast Tilt Angle(F/R) | Deg | 12° |
| Dimension | mm | 3700*1800*2450 |
| Tires | mm | 20.5/70-16 |
| Turning radius (outside tires) | mm | 3600 |
| Lift Height | mm | 3000 |
| Fork length (standard) | mm | 1220 |
| Ground Clearance（Bottom of mast） | mm | 270 |
| Mast Lowered Height | mm | 2270 |
| Engine | Yunnei490 | |
| Rated output/r.p.m. | kw | 58/2200-2400 |
| Rated torque/r.p.m. | N·m | 220-450/1500-1800 |
| No.of Cylinder | 4 | |
| No.of Cylinder | mm | 102×115 |
| Displacement | L | 3.76 |
| Drive Model | 4WD | |
| Gearbox | 265 |
Planning an FD35R enquiry
Share load weight and dimensions, lift height, ground conditions, travel route, attachments, duty cycle and delivery destination. The maximum-gradeability row shows “<35°” under a percent label; confirm the unit, measurement method and load condition with OLIFT.
Frequently asked questions
What capacity and lift height are listed?
The table lists 3,500 kg rated capacity and a 3,000 mm lift height. Confirm the load chart for your load and attachment.
What engine and drive are specified?
The table lists 4WD and a Yunnei 490 engine, with rated output of 58 kW at 2,200–2,400 rpm. Confirm the available engine setup.
What information helps with selection?
Provide the load, lift height, ground and slope conditions, attachments, shift pattern and delivery destination.
Reviews
There are no reviews yet.